Home
 管理页面
研究所介绍
团队介绍
学术队伍
团队成员
研究所组成
团队风采
合作与创新
无标题文档
  

Richard J. Bateman 兼职教授(Visiting Professor)


个人简介(Introduction)

Richard J. Bateman,英国Coventry大学,工程、环境与计算机学院,博士生导师。创客空间技术的创始人之一。

现任英国Coventry大学工程管理与制造策略专业负责人;英国Brunel大学先进制造合作研究网络开发研究中心负责人;英国Warwick大学国际先进制造研究中心负责人。担任英国计算机学会会员;英国工程与技术研究院成员;国际敏捷制造协会会员;英国三维打印技术研究协会会员;英国高等教育研究院会士;英国标准协会(BSI):工艺产品实现设计类标准评审委员;国际标准化组织(ISO)工艺产品实现设计类标准评审委员;英国国家自然科学基金委(EPSRC)中英国际合作研究计划(GSMN可持续制造网络)主要发起人之一;英国无线电与遥感研究协会顾问。

发表著作1部,论文35篇;已成功指导14名博士、110余名研究生。先后主持欧盟研究与技术开发框架计划(FP7)工业制造项目2项;英国国家自然科学基金委(EPSRC)研究项目2项;英国Brunel大学与韩国机械研究院合作项目1项;英国Brunel大学与英国Cambridge大学合作项目1项;英国私有制造商Pennine Healthcare与英国Derby大学合作项目2项;美国热塑性石蜡与聚丙烯供应商Advanced Composites公司与英国Derby大学合作项目1项;英国TSB银行研究合作项目3项。


学历和学位(Academic Qualifications)

1. 硕士学位,1994年,英国Derby大学先进制造技术专业

2. 硕士学位,1996年,英国Derby大学工商管理硕士学位

3. 博士学位,2005年,英国Leeds Metropolitan大学制造系统工程专业

4. 硕士学位,2011年,获英国De Montfort大学快速产品研发专业


主持或参与的科研项目(Research Projects)

欧盟研究与技术开发框架计划(FP7)工业制造项目

(1) 第一主研:ConTemp – Self-Learning Control of Tool Temperature in Cutting Processes.

(2) 第一主研:EuroEnergest - increase of automotive car industry competitiveness through an integral and artificial intelligence driven energy management system.

英国国家自然科学基金委(EPSRC)研究项目

(3) 第一主研:Exploiting Legacy Data in New Product Development Processes. completed March 2001.

(4) 第一主研:EPSRC: Exploiting Legacy Data in New Product Development Processes. completed March 2001.

英国Brunel大学与韩国机械研究院合作项目

(5) 第一主研:Commercial project for KIMM, Korea, on Micro Featured Surfaces.

英国Brunel大学与英国Cambridge大学合作项目

(6) 第一主研:Commercial project Sustainability in Automotive Manufacturing for General Motors (in collaboration with IfM Cambridge University).

英国私有制造商Pennine Healthcare与英国Derby大学合作项目

(7) 主持、负责人:Pennine Group & University of Derby, 2001, Development of customised manufacturing machine.

(8) 主持、负责人:Pennine Healthcare & University of Derby, 2003, Manufacturing system development for customised procedure packs.

美国热塑性石蜡与聚丙烯供应商Advanced Composites公司与英国Derby大学合作项目

(9) 主持、负责人:Advanced Composites & University of Derby, 2003, Manufacturing traceability system development.

英国TSB银行研究合作项目

(10) 子项目主持、负责人:TSB research project - IdAAt project – for development of covert and overt anti counterfeit identification methods and techniques.

(11) 子项目主持、负责人:TSB research project - DW-EASY – Direct writing for aerospace applications.

(12) 第一主研:TSB research project - VITREP – laser repair of vitreous products.


发表的论文和论著(Publications)

论文

(1) V. Razdan*, R. Bateman, (2015), Investigation into the use of Smartphone as a Machine vision device for Engineering Metrology and Flaw detection, with focus on Drilling, International Society for Optics and Photonics (SPIE) annual conference, Munich June 22-24, 2015 (accepted).

(2) K. Katchasuwanmanee, R. Bateman and K Cheng, (2015), An Integrated Approach to Energy Efficiency in Automotive Manufacturing Systems: Quantitative Analysis and Optimisation, the 13th International Conference on Manufacturing Research (ICMR) 8 - 10 September 2015, University of Bath, UK, (accepted).

(3) K. Katchasuwanmanee, R. Bateman and K Cheng, Development of the Energy-smart Production Management System (e-ProMan): a Big Data Driven Approach, Analysis and Optimisation, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 0954405415586711, first published on June 1, 2015.

(4) N.Seyajah, K.Cheng & R.Bateman., (2015), An of investigation tools for sustainable design index and its implementation perspective The 25th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) June 23-26 2015, Wolverhampton, UK.

(5) N.Seyajah, K.Cheng, & R.Bateman. (2014), Development of Sustainable Design Index for Office Furniture Design and Its CAD-Based Implementation. Proceeding Technical& Computer and Information in Engineering Conference IDETC/CIE 2014, August 17-20 2014, Buffalo New York USA.

(6) N.Seyajah, K.Cheng & R.Bateman. (2014), Sustainable Design and Innovation for Office Furniture and Its Implementation. The 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) May 20-23 2014, San Antonio Texas.

(7) N.Seyajah, K.Cheng & R.Bateman.(2013), An Investigation On Method and Tools For Sustainable Design Of Office Furniture, 6th International Conference Design and Manufacturing for Sustainable Development (ICDMSD 2013) April 15-17 2013, pp. 27-34, Hangzhou China.

(8) Minton, T., Ghani, S., Bateman, R., Sammler, F., Fürstmann, P., & Roeder, M. (2013). Temperature of internally-cooled diamond-coated tools for dry-cutting titanium. International Journal of Machine Tools and Manufacture, 75, 27-35.

(9) De Coster, R., & Bateman, R. (2012). Innovation and Knowledge Development Implications of Collaborative Networks for Product Development. International Journal of Production Research.

(10) Saiful, C-G., Cheng, K., Sun, X., & Bateman, R. (2012). Optimizing heat transfer rate in an internally cooled cutting tool: FE-based design analysis and experimental study. Key Engineering Materials, 496, 188-193.

(11) Ibrahim, R., Bateman, R., Cheng, K., Wang, C., & Au, J. (2011). Design and analysis of a desktop micro-machine for vibration-assisted micromachining. P I MECH ENG B-J ENG, 225(B8), 1377-1391. doi:10.1177/2041297510393625

(12) De Coster, R., Bateman, R., & Plant, A. (2011). Sustainable Design Strategies for Electronics Products Utilising Life Cycle Assesment. In International Conference on Production Research (ICPR). Stuttgart, Germany.

(13) Sun, X., Bateman, R., Cheng, K., & Ghani, S. C. (2011). Design and analysis of an internally cooled smart cutting tool for dry cutting. Proc. IMechE Part B: J. Engineering Manufacture, Vol. 225.

(14) De Coster, R., Bateman, R., & Plant, A. (2010), Sustainable Development Strategies for Product Provision and Manufacturing Processes", Proceedings of the 15th Cambridge International Manufacturing Symposium, 23/24th September, Cambridge University, UK.

(15) Harun, K., Bateman, R., & Cheng, K. (2010), "Modelling and characterisation of Automotive coating systems for sustainable manufacturing", Proceedings of the 8th International Conference on Manufacturing Research ICMR 2010, 14th-16th September, Durham University, UK.

(16) Bateman, R and Cheng, K., (2008), "e-Manufacture: Characteristics, applications and potential", Progress in Natural Science Vol. 18 (2008) pp1323–1328.

(17) Bateman, R., (2008), "Rapid Manufacturing as a Tool for Advanced Ceramics", Ceramics Industry Report (membership confidential), CERAM core technology report No.N08C0R01.

(18) Bateman, R. and Muir, R., (2008), "Novel aerosol sampling techniques for workplace health risk assessment", Inhaled Particles X conference, Sheffield, 23-25 September.

(19) Bateman, R (Ed), (2007), "Proceedings of the First International Conference on Direct Writing", First International Conference on Direct Writing, Durham, April 16th-17th.

(20) Bateman, R., (2007), "New Product Development Tools for the Ceramics Industries", Ceramics Industry Report (membership confidential), CERAM technology report No.EP2007/54A.

(21) Bateman, R and Cheng, K., (2006), "Rapid Manufacturing as a Tool for Agile Manufacturing: Application and Implementation Perspectives", International Journal of Agile Manufacturing, Vol. 1, No. 2, pp - .

(22) Bateman, R and Cheng, K. (2006) "Extending the Product Portfolio with ‘Devolved Manufacturing’: Methodology and Case Studies ", International Journal of Production Research, Vol. 44, No. 16, 15 August 2006, pp 3325–3343

(23) Lu, B.H., Bateman, R.J. and Cheng, K. (2006) ‘RFID enabled manufacturing: fundamentals, methodology and applications’, Int. J. Agile Systems and Management, Vol. 1, No. 1, pp.73–92.

(24) Bateman, R and Cheng, K., (2006), "Even Closer to the Customer: Mass Customization and the Devolved Manufacturing Concept", International Journal of Mass Customisation,

(25) Bateman, R and Cheng, K., (2006), "e-Manufacture: Characteristics, applications and potential", Fifth UK e-science All Hands Meeting, 18-21 September 2006, East Midlands Conference Centre, Nottingham University, UK..

(26) Bateman, R and Cheng, K., (2005), "e-Manufacture: thinking outside the box?", Proceedings of ISAM 2005, International Conference on Agility", 27-28 July, Helsinki University of Technology, Finland.(ISBN 951-22-7768-9).

(27) Bateman, R and Zhao, Z, X, (2004), "Parallel development: Transition from ‘e-Support’ to ‘e-Learning’", Proceedings of the 10th Annual Conference of CACSUK2004, 18 September, University of Liverpool, Liverpool, UK.

(28) Bateman, R and Cheng, K., (2004), "Internet based end-user design and e-manufacture", Advances in e-Engineering and Digital Enterprise Technology -Proceedings of Fourth International Conference on Digital Enterprise Technology", 1-3 September Leeds Metropolitan University, Leeds, UK, (ISBN 1 86058 467 5)

(29) Bateman, R and Zhao, Z, X, (2003), "Parallel development: a painless way to develop e-learning", Proceedings of the 9th Annual Conference of CACSUK2003, 20-21 September, University of Luton, Luton, UK, (ISBN: 0953389057)

(30) Bateman, R and Cheng, K., (2002), "Devolved manufacturing", International Journal of Concurrent Engineering, 10(4), 291-298, (ISSN 1063 293X)

(31) Bateman, R and Cheng, K., (2002), "Web-based distributed manufacturing and customization", Proceedings of DET 2002, 1st CIRP (UK) International Seminar on "Digital Enterprise Technology", 16-17 September University of Durham, Durham, UK

(32) Bateman, R. and Cheng, K., (2001), "Devolved manufacturing", Proceedings of ICeCE 2001 International Conference on eCommerce Engineering, 16-18 September, Xi’an, P.R.China.

(33) Baines, R, Colquhoun, G, Bateman, R and Jones, N, (2001), "The benefits of using customized procedure packs", British Journal of Perioperative Nursing, 11(1), 34-39, (ISSN 147-1026)

著作

一本与英国标准协会(BSI)合作的著作正在出版中.


 Home